Black Friday is a good week to fix your desk. It's a bad week to fill it.
Every brand is about to send you a percentage off. Most of what gets bought this week ends up in a drawer by March. I build desk goods out of solid hardwood in my shop in Colorado Springs, and I'd rather you buy one thing you keep for ten years than five things you return in January.
So here's how I'd shop it. What to buy first, what to check before you pay, and what to skip.
I'm not running a big Black Friday sale. Sign up for my email list and you get 10% off your first order. That's the deal.
The short version
- Fix your screen height first.
- Check what it's made of before you check the price.
- Use the space under the riser before you buy more desk.
- Give your phone one spot.
- Give the small stuff a home.
- Go up the wall when the desk is full.
- Skip anything you'd only buy because it's on sale.
1. Start with what holds up your screen
If you only buy one thing this week, buy a riser.
On most desks the monitor sits too low. You spend all day looking down at it, and your neck knows. The space in front of the screen also turns into the place where everything piles up. (If you want the exact numbers, here's how high your monitor should be.)
A riser fixes both at once. The screen comes up toward eye level. The desk underneath opens back up for your keyboard, a notebook, or a closed laptop.
The Monolith Monitor Riser comes in two lengths.
| Size | Best for | Maple | Walnut | Black Oak |
|---|---|---|---|---|
| 30" | One monitor, or a monitor and a laptop | $275 | $299 | $325 |
| 42" | Two monitors side by side, or an ultrawide | $325 | $349 | $375 |


Measure your monitor bases before you pick. Two screens means 42".
Black oak costs more for one reason. Ebonizing it takes me longer. Same solid board, more hours in the shop.
2. Check the material before you check the discount
This is where Black Friday gets expensive.
A lot of "premium wood" desk goods are birch plywood with a thin walnut veneer glued on top. Some stand on MDF feet painted black. The listing still says wood. Technically, it is. It's just not what most people think they're paying for.
You can check any product in about thirty seconds.
- Look at the edge. Plywood shows stripes, thin layers stacked like a sandwich. Solid wood shows grain that wraps around the corner and keeps going.
- Read the spec list, not the headline. Look for the words plywood core, veneer, MDF, or engineered wood.
- Look at the feet. That's where a lot of brands cut cost. Cork and painted MDF show up a lot.
- Think about the first scratch. Veneer is paper thin. Once you're through it, you're looking at the plywood underneath and you can't fix it. Solid wood you sand, oil, and it looks new.
Every wood piece I make is solid walnut, maple, or black oak. Top, legs, all of it. No veneer, no MDF, no plywood. I wrote a full breakdown on how to tell solid wood from plywood and veneer if you want to go deeper.
A big discount on plywood is still plywood.
3. Use the space under the riser
Once the monitor's up, you've got a whole new level under it. Left alone, it fills with cables and whatever you set down last.
I make three add-ons that bolt to the underside of the Monolith riser. They're powder-coated steel in matte black, built for it and nothing else.
| Add-on | What it does | Price |
|---|---|---|
| Shelf | A felt-lined steel tier for a closed laptop, notebook, or keyboard | $98 |
| MagSafe Holder | Holds your iPhone at a comfortable height and angle while it charges | $42 |
| Headphone Holder | Hangs your headphones off the riser instead of the desk | $42 |



If you're getting a riser this week, add these in the same order. Your 10% covers the whole first order.
4. Give your phone one spot
Your phone is on the desk all day anyway. Give it one place to live, standing up and charging, where you can see it without picking it up.
The Monolith MagSafe Stand is a single block of solid hardwood. It holds your MagSafe charger at a 75 degree angle. Good for video calls. Good for StandBy mode on a nightstand. It works with iPhone 12 and newer.

It holds the MagSafe charger you already own. The charger isn't included.
$130 in maple or black oak. $145 in walnut.
Already getting a riser? The $42 MagSafe Holder does the same job from underneath it. Pick one. You don't need both.
5. Give the small stuff a home
Pens, AirPods, keys, SD cards, a watch. Small things make most of the mess, because none of them has a place to go.
- Pen Tray. $55 in maple, $69 in walnut or black oak. For the pens and little things that live next to your keyboard.
- Catch-All Tray. $75 each, or $135 for a pair. For keys, AirPods, a watch, and whatever comes out of your pockets.


If you get the pair, put one on the desk and one by the door.
6. When the desk is full, go up
At some point there's no more desk to give. That's when you use the wall.
The Monolith Wall Shelf is three tiers of solid hardwood, cut from a single board. It hangs on a French cleat. It's for the things you want to see but don't want on your desk. Cameras, lenses, a couple of good mugs, the record that's playing.

$495 in rustic walnut, maple, or black oak. It's the biggest piece I make, and the one where your 10% saves you the most.
7. Buy for how you actually work
The right setup depends on what your day looks like. Here's where I'd start for a few different desks.
On calls all day. A riser, so your camera comes up with your screen and stops looking up your nose. Add the MagSafe Holder so your phone sits in view without cluttering the desk.
Video, photo, and design work. The 42" riser for two screens. The Headphone Holder, because you're in and out of headphones all day. The Wall Shelf for gear you want close. I edit video for a living, and this is close to what my own desk looks like.
Developers. The 30" or 42", depending on your screens. The Shelf underneath for a closed laptop. A Pen Tray for the stuff that collects around a keyboard.
Minimalists. A riser and one Catch-All Tray. That's it. Leave the rest of the desk empty and enjoy it.
8. What to buy at every budget
Prices below are before your 10% sign-up discount.
| Budget | What I'd buy | Why |
|---|---|---|
| Under $100 | A Pen Tray ($55 to $69) or a Catch-All Tray ($75) | The cheapest way to clear the clutter off a desk |
| $100 to $150 | A MagSafe Stand ($130 to $145) or a pair of Catch-All Trays ($135) | Your phone gets one spot, or the desk and the door each get a tray |
| $275 to $375 | A 30" riser ($275 to $325), plus the $42 MagSafe Holder | Fixes screen height and frees up the desk. The biggest change for the money |
| About $500 | A 42" walnut riser, the Shelf, and the Headphone Holder ($489) | A finished two-screen setup with nothing left on the desk surface |
| $495 | The Wall Shelf | When the desk is already sorted and you want to go up |
Got a work-from-home stipend to spend before the year ends? A 30" walnut riser, the Shelf, and a walnut Pen Tray come to $466 before the discount.
9. Buying it as a gift
Shopping for someone who works from home? Here's the cheat sheet.
- Safe bet, under $75. A Pen Tray or a Catch-All Tray. Everybody has a pile of keys and pens. Nobody hates a good tray.
- For the iPhone person, under $150. The MagSafe Stand. Make sure they already have a MagSafe charger, because it isn't included.
- The big one. A Monolith riser. Only if you know their setup. 30" for one screen, 42" for two. If you're not sure, sneak a photo of their desk first.
Everything is hand built in my shop, and orders are delivered within seven days. To get it there before Christmas, order by December 12.
10. What to skip this Black Friday
Some of the best money you'll save this week is on things you don't buy.
- Veneer at solid wood prices. If you can't tell what's under the surface, assume it's plywood.
- A second thing that does the same job. A phone stand and a phone holder. Two trays for one desk. Pick one.
- Anything sized for a desk you don't have. Measure first. Returns eat your whole weekend.
- Decor before function. Fix the screen height and the clutter first. The nice extras look better on a desk that already works.
- Anything you'd only buy because it's 40% off. If you wouldn't want it at full price in March, you don't want it now.
11. The checklist before you check out
Run through this before you hit buy. Anywhere, not just here.
- I measured my desk and my monitor bases.
- I know exactly what problem this fixes.
- It has a permanent spot on my desk.
- It's solid wood, not veneer over plywood or MDF.
- It doesn't do the same job as something I already own.
- I'd still want it at full price next month.
Six checks? Buy it.
Build a better desk, not a bigger pile
The best desk isn't the one with the most stuff on it. It's the one where everything has a place and nothing needs replacing.
Every wood piece in the Monolith Collection is hand built by me in Colorado Springs, out of solid walnut, maple, or black oak. Free shipping in the US, and it's on your desk within seven days.
Sign up for the email list and take 10% off your first order.
Black Friday desk FAQ
What should I buy first?
A monitor riser. It fixes your screen height and clears the desk underneath. Everything else works better once that's done.
Should I get the 30" or the 42" riser?
One monitor, or a monitor and a laptop, gets the 30". Two monitors or an ultrawide gets the 42". Measure your monitor bases before you order.
Is it really solid wood?
Yes. The risers, trays, MagSafe Stand, and Wall Shelf are solid walnut, maple, or black oak. No veneer, no plywood, no MDF. The riser add-ons are powder-coated steel, and they say so.
How fast does it ship?
Orders are built in my shop and delivered within seven days. Shipping is free in the US.
Will it get here before Christmas?
Order by December 12 and it will.
What if I don't like it?
Reach out within 30 days and we'll sort out a return.
Does the MagSafe Stand come with a charger?
No. It holds the Apple MagSafe charger you already have. Same goes for the MagSafe Holder.
How do I take care of the wood?
Wipe it with a soft, slightly damp cloth. Skip harsh chemicals and standing water.
When is Black Friday 2026?
Friday, November 27. Cyber Monday is November 30.
0 comments